AT Precision Coatings
Menu
Residential

Worktop Coatings

Resurface worn laminate worktops with seamless, food-safe sprayed coatings — stone-look, solid colour or granite-effect, without the cost of new stone.

Contact usSee our work

Worktops take the hardest life in the kitchen — scorches by the hob, water swelling at the sink, knife scars near the board. Replacing them means joinery, plumbing and a week of takeaways. Worktop coatings from AT Precision Coatings resurface what you already have with a seamless, food-safe sprayed finish that looks and performs like a far more expensive surface.

Choose solid colour, stone-effect or granite-fleck, in matte or satin. The system builds an adhesion primer, colour coats and a certified food-contact-safe clear seal that resists heat, stains and moisture. Edges, upstands and splashbacks are coated in the same run for a factory-continuous look.

Applied in two to three days with the kitchen largely usable throughout, it is the fastest way to a “new kitchen” feel — and it pairs perfectly with our kitchen resprays for a full transformation on a laminate budget.

Why worktop coatings

Stone look, laminate budget

Granite-effect and solid stone-look finishes at a fraction of quartz or granite cost.

Food-safe & hygienic

Certified food-contact-safe clear coats with a seamless, non-porous surface.

Heat & stain resistant

Formulated for daily kitchen life — hot mugs, curry nights and red wine included.

No rip-out

Existing worktops are coated in situ — no plumber, no joinery, no mess.

How it works

  1. 1

    Worktop assessment

    We check substrate condition, edge profiles and confirm the finish system.

  2. 2

    Deep degrease

    Kitchen-grade degreasing and de-glossing to guarantee adhesion.

  3. 3

    Repair & prime

    Chips filled, burns sanded, then adhesion primer flowed over the whole surface.

  4. 4

    Colour coats

    Your chosen colour or stone-effect build applied in controlled coats.

  5. 5

    Seal & cure

    Food-safe clear seal coats, controlled cure and care walkthrough.

Questions, answered

Can you coat over existing laminate worktops?
Yes — laminate is the most common substrate we coat, along with solid wood and previously painted surfaces in sound condition.
How heat resistant is it?
Resistant to normal kitchen temperatures — boiling pans on the hob and hot mugs are fine. We still recommend trivets for pans straight off the ring, as with any worktop.
Is it really food-safe?
Yes. The fully cured clear coat is certified food-contact safe, which we document in your handover pack.
Can you do upstands and splashbacks too?
Yes — upstands, splashback panels and window reveals are coated in the same system for a seamless run.
How long is the kitchen out of use?
The worktop is out of service for around 48 hours during coating and cure; the rest of the kitchen stays usable.

Ready to transform your surfaces?

Tell us what needs coating — send the contact form and our team replies within one working day.

Contact us Try the colour lab